For whole-house applications. PCC Series filter cartridges contain
food-grade hexametaphosphate that dissolves slowly in water to inhibit
scale and rust build-up. All materials are FDA grade. These cartridges are
available in four feeder sizes with variable volumes of phosphate crystals
and are effective for treating scale, corrosion and iron problems for up to
six months at various flow rates and feed concentrations. This type of
treatment is recommended for use with ice machines, coffee and vending
machines, food service equipment, water heaters, air conditioning equipment
and many other types of water-processing equipment.
- Highly effective at treating scale, corrosion and iron (up to 1ppm)
problems for up to 6 months
- Food-grade hexametaphosphate crystals dissolve slowly in water to
prevent lime, scale and rust buildup
- All materials are FDA grade
- Three unique designs to fit multiple applications
- Variety of media volumes and flow rates
- Manufactured with all FDA-grade materials
PCC212 and PCC218 cartridges are designed to fit PENTEK #10 Standard or
Slim LineÃ?Â® filter housings. The PCC-1 cartridge is designed to fit in #10
Standard filters only. The PCC-106 is an insert element that is placed in
the center core of the cartridge. It is designed for use with standard 10"
and 20" radial flow, sediment and carbon-block double open-ended filter
CAUTION: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid
contact with eyes. In case of eye contact, flush with water for 15 minutes,
get medical attention. Keep out of reach of children.
WARNING: For drinking water applications, do not use with water that is
microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
NOTE: PCC212 and PCC218 cartridges are not recommended for main line water
applications with flow rates exceeding 3.0 gpm (11.4 lpm).
NOTE: With steamers, the water should be flushed daily.
CAUTION: Do not use this cartridge on water that will be carbonated.